3NB Series Mud Pump for oil field fluid control
Product Introduction:
3NB series mud pump includes：3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600, 3NB-2200.
3NB series mud pumps are inclusive of 3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600 and 3NB-2200.
|
Model |
3NB-350 |
3NB-500 |
3NB-600 |
3NB-800 |
|
Type |
Triplex single acting |
Triplex single acting |
Triplex single acting |
Triplex single acting |
|
Output power |
257kw/350HP |
368kw/500HP |
441kw/600HP |
588kw/800HP |
|
Rated strokes (stroke/minute) |
130 |
120 |
135 |
130 |
|
Length of the stroke mm(in) |
180(7.1) |
180(7.1) |
196(7.7) |
273(10.7) |
|
Max. Dia.of line rmm(in) |
160(6.3) |
170(6.7) |
180(7.1) |
180(7.1) |
|
Dia. of suction inlet mm(in) |
203(8.0) |
203(8.0) |
203(8.0) |
254(110) |
|
Dia. of discharge port mm(in) |
76(3.0) |
83(3.3) |
83(3.3) |
101(4.0) |
|
Gear ratio |
4.483 |
4.696 |
4.696 |
3.482 |
|
Driving wheel speed |
582.8 |
563.52 |
633.96 |
452.66 |
|
Overall dimension mm(in) |
3600*2080*2015 (141.7*81.9*79.3) |
3600*2230*2080 (141.7*87.8*81.9) |
3600*2230*2080 (141.7*87.8*81.9) |
3900*2155*2052 (153.5*84.8*80.8) |
|
Weight kg(lbs) |
8058(17765) |
9484(20909) |
11000(24251) |
17200(37920) |
|
Model |
3NB-1000 |
3NB-1300 |
3NB-1600 |
3NB-2200 |
|
Type |
Triplex single acting |
Triplex single acting |
Triplex single acting |
Triplex single acting |
|
Output power |
735kw/1000HP |
955kw/1300HP |
1176kw/1600HP |
1618kw/2200HP |
|
Rated strokes (stroke/minute) |
125 |
120 |
120 |
105 |
|
mm(in) Length of the stroke |
273(10.7) |
305(12.0) |
305(12.0) |
356(14.0) |
|
mm(in) Max. Dia. of liner |
180(7.1) |
190(7.5) |
190(7.5) |
230(9.1) |
|
mm(in) Dia. of suction inlet |
254(10) |
305(12.0) |
305(12.0) |
305(12.0) |
|
mm(in) Dia. of discharge port |
101(4.0) |
101(4.0) |
101(4.0) |
130(5.1) |
|
Gear ratio |
3.482 |
4.194 |
3.657 |
3.512 |
|
Driving wheel speed |
435.25 |
503.28 |
438.84 |
368.76 |
|
mm(in) Overall dimension |
3900*2240*2052 (153.5*88.2*80.8) |
4300*2450*251 (169.3*96.5*9.9) |
4720*2822*2660 (185.8*111.1*104.8) |
6000*3465*2745 (236.2*136.4*108.1) |
|
kg(lbs) Weight |
17500(38581) |
23000(50706) |
27100(59745) |
38800(85539) |
|
Note: Mechanical efficiency by 90%, Volume efficiency by 20%. |
||||
Related products
-
Swivel on Drilling Rig transfer drill fluid int...
The drilling Swivel is the main equipment for the rotary circulation of the underground operation. It is the connection between the hoisting system and the drilling tool, and the connection part between the circulation system and the rotating system. The upper part of the Swivel is hung on the hookblock through the elevator link, and is connected to the drilling hose by the gooseneck tube. The lower part is connected with the drill pipe and the downhole drilling tool...
-
Crown Block of Oil/Gas Drilling Rig with Pulley...
Technical Features: • The sheave grooves are quenched to resist wear and extend its service life. • The kick-back post and rope guard board prevent the wire rope from jumping out or falling out of the sheave grooves. • Equipped with safety chain anti-collision device. • Equipped with a gin pole for repairing the sheave block. • Sand sheaves and auxiliary sheave blocks are provided in accordance with users’ requirements. •The crown sheaves are completely interchangeab...
-
Traveling Block of oil drilling rigs high weigh...
Technical Features： • The Traveling Block is an important key equipment in the workover operation. Its main function is to form a pulley block by the sheaves of the Traveling Block and the mast , double the pulling force of the drilling rope, and bear all the downhole drill pipe or oil pipe and workover instruments through the hook. • The sheave grooves are quenched to resist wear and extend their service life. • The sheaves and bearings are interchangeable with th...
-
Hook Block Assembly of Drill Rig high weight li...
1. The hook block adopt the integrated design. The traveling block and the hook are connected by the intermediate bearing body, and the big hook and the cruiser can be separately repaired. 2. The inner and outer springs of the bearing body are reversed in opposite directions, which overcomes the torsion force of a single spring during compression or stretching. 3. The overall size is small, the structure is compact, and the combined length is shortened, which is suit...
-
Elevator Link for hanging Elevator from TDS
• Designing and manufacturing conform to API Spec 8C standard and SY/T5035 relevant technical standards etc.; • Select high-class alloy steel die to forge molding; • Intensity check uses finite element analysis and electrical measuring method stress test. There are one-arm elevator link and two-arm elevator link; Adopt two-stage shot blasting surface strengthening technology. One-arm Elevator Link Model Rated load (sh.tn) Standard working le...
-
Mechanical Drive Drawworks on Drilling Rig
• Drawworks positive gears all adopt roller chain transmission and negative ones adopt gear transmission. • Driving chains with high accuracy and high strength are forced lubricated. • The drum body is grooved. The low-speed and high-speed ends of drum are equipped with ventilating air tube clutch. The main brake adopts belt brake or hydraulic disc brake, while the auxiliary brake adopts configured electromagnetic eddy current brake(water or air cooled). Basic Parame...