API 7K Casing Slips for Drill Handling Tools
Casing Slips can accommodate casing from 4 1/2 inch to 30 inch (114.3-762mm) O.D.
Technical Parameters
| Casing O.D | In | 4 1/2-5 | 5 1/2-6 | 6 5/8 | 7 | 7 5/8 | 8 5/8 | ||||
| Mm | 114.3-127 | 139.7-152.4 | 168.3 | 177.8 | 193.7 | 219.1 | |||||
| Weight | Kg | 75 | 71 | 89 | 83.5 | 75 | 82 | ||||
| Ib | 168 | 157 | 196 | 184 | 166 | 181 | |||||
| insert bowl No | API or No.3 | ||||||||||
| Casing O.D | In | 9 5/8 | 10 3/4 | 11 3/4 | 13 3/4 | 16 | 18 5/8 | 20 | 24 | 26 | 30 |
| Mm | 244.5 | 273.1 | 298.5 | 339.7 | 406.4 | 473.1 | 508 | 609.6 | 660.4 | 762 | |
| Weight | Kg | 87 | 95 | 118 | 117 | 140 | 166.5 | 174 | 201 | 220 | 248 |
| Ib | 192 | 209 | 260 | 258 | 308 | 367 | 383 | 443 | 486 | 546 | |
| insert bowl No | No.2 | No.1 | Matching casing bushing | ||||||||
Related products
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K Type DDZ Elevator 100-750 tons
DDZ series elevator are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons 750 tons. The size ranges from 2 3/8” to 6 5/8”. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) Remark DDZ-100 2 3/8-5 100 MG DDZ-15...
-
API 7K TYPE SD ROTARY SLIPS Pipe handling tools
Technical Parameters Model Slip Body Size(in) 3 1/2 4 1/2 SDS-S pipe size in 2 3/8 2 7/8 3 1/2 mm 60.3 73 88.9 weight Kg 39.6 38.3 80 Ib 87 84 80 SDS pipe size in 2 3/8 2 7/8 3 1/2 3 1/2 4 4 1/2 mm 60.3 73 88.9 88.9 101.6 114.3 w...
-
API Type LF Manual Tongs for Oil Drilling
TypeQ60-178/22(2 3/8-7in)LF Manual Tong is used for making up or breaking out the screws of drill tool and casing in drilling and well servicing operation. The handing size of this type tong can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque mm in KN·m 1# 1 60.32-73 2 3/8-2 7/8 14 2 73-88.9 2 7/8-3 1/2 2# 1 88.9-107.95 3 1/2-4 1/4 2 107.95-127 4 1...
-
API 7K Y SERIES SLIP TYPE ELEVATORS Pipe handli...
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It is especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Si...