API 7K TYPE B MANUAL TONGS Drill String Handling
Type Q89-324/75(3 3/8-12 3/4 in)B Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and handling shoulders.
Technical Parameters
| No.of Latch Lug Jaws | Latch Stop | Size Pange | Rated Torque | |
| in | mm |
KN·m |
||
|
5a |
1 |
3 3/8-4 1/8 | 86-105 |
55 |
|
2 |
4 1/8-5 1/4 | 105-133 |
75 |
|
|
5b |
1 |
4 1/4-5 1/4 | 108-133 |
75 |
|
2 |
5-5 3/4 | 127-146 |
75 |
|
|
3 |
6-6 3/4 | 152-171 |
75 |
|
|
5b-1 |
1 |
5 1/4-5 3/4 | 133-146 |
75 |
|
2 |
6-8 5/8 | 152-168 |
75 |
|
|
3 |
6 3/4-8 | 171-203 |
55 |
|
|
5c
|
1 |
6 5/8-7-3/8 | 168-187 |
75 |
|
2 |
7 3/8-8 | 187-203 |
75 |
|
|
3 |
8 1/2-8 5/8 | 216-219 |
55 |
|
|
5d |
1 |
8 1/2-9 5/8 | 216-244 |
55 |
|
2 |
10 5/8-10 3/4 | 270-273 |
55 |
|
|
5e |
1 |
11 3/4 | 298 |
55 |
|
2 |
12 3/4 | 324 |
55 |
|
Related products
-
API 7K TYPE SDD MAUNAL TONGS to Drill String
No.of Latch Lug Jaws No.of Hinge Pin Hole Size Pange Rated Torque in mm 1# 1 4-5 1/2 101.6-139.7 140KN·m 5 1/2-5 3/4 139.7-146 2 5 1/2-6 5/8 139.7 -168.3 6 1/2-7 1/4 165.1-184.2 3 6 5/8-7 5/8 168.3-193.7 73/4-81/2 196.9-215.9 2# 1 8 1/2-9 215.9-228.6 9 1/2-10 3/4 241.3-273 2 10 3/4-12 273-304.8 3# 1 12-12 3/4 304.8-323.8 100KN·m 2 13 3/8-14 339.7-355.6 15 381 4# 2 15 3/4 400 80KN·m 5# 2 16 406.4 17 431.8 ...
-
API 7K Casing Slips for Drill Handling Tools
Casing Slips can accommodate casing from 4 1/2 inch to 30 inch (114.3-762mm) O.D. Technical Parameters Casing O.D In 4 1/2-5 5 1/2-6 6 5/8 7 7 5/8 8 5/8 Mm 114.3-127 139.7-152.4 168.3 177.8 193.7 219.1 Weight Kg 75 71 89 83.5 75 82 Ib 168 157 196 184 166 181 insert bowl No API or No.3 Casing O.D In 9 5/8 10 3/4 11 3/4 13 3/4 16 18 5/8 20 24 26 30 Mm 244.5 273.1 298.5 339.7 406.4 473.1 508 609.6 660.4 762 Weight Kg 87 95 118 117 140 166.5 174 201 220...
-
API 7K DRILL COLLAR SLIPS for Drilling line Ope...
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D. Technical Parameters slip type drill collar OD weight insert bowl No in mm kg Ib DCS-S 3-46 3/4-8 1/4 76.2-101.6 51 112 API or No.3 4-4 7/8 101.6-123.8 47 103 DCS-R 4 1/2-6 114.3-152.4 54 120 5 1/2-7 139.7-177.8 51 112 DCS-L 6 3/4-8 1/4 171.7-209.6 70 154 8-9 1/2 203.2-241.3 78 173 8 1/2-10 215.9-254 84 185 N...
-
API 7K Safety Clamps for Drilling String Operation
Safety Clamps are tools for handling flush joint pipe and drill collar. There are three types of safety clamps: Type WA-T, Type WA-C and Type MP. Technical Parameters Model pipe O.D.(in) No. of Chain links Model pipe O.D.(in) No. ofChain links WA-T 1 1/8-2 4 MP-S 2 7/8-4 1/8 7 4-5 8 MP-R 4 1/2-5 5/8 7 2 1/8-3 1/4 5 5 1/2-7 8 6 3/4-8 1/4 9 3 1/2-4 1/2 6 9 1/4-10 1/2 10 MP-M 10 1/2-11 1/2 11 WA-C 3 1/2-4 5/8 7 11 1/2-12 1/2 12 4 1/2-5 5/8 8 12 1/2...
-
API 7K Type DDZ Elevator 100-750 tons
DDZ series elevator are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons 750 tons. The size ranges from 2 3/8” to 6 5/8”. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) Remark DDZ-100 2 3/8-5 100 MG DDZ-15...
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...