TypeQ60-178/22(2 3/8-7in)LF Manual Tong is used for making up or breaking out the screws of drill tool and casing in drilling and well servicing operation. The handing size of this type tong can be adjusted by changing latch lug jaws and handling shoulders.
Technical Parameters
No.of Latch Lug Jaws
Latch Stop
Size Pange
Rated Torque
mm
in
KN·m
1#
1
60.32-73
2 3/8-2 7/8
14
2
73-88.9
2 7/8-3 1/2
2#
1
88.9-107.95
3 1/2-4 1/4
2
107.95-127
4 1...
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
Model
Size(in)
Rated Cap(KN)
in
mm
SJ
2 3/8-2 7/8
60.3-73.03
45
3 1/2-4 3/4
88.9-120.7
5-5 3/4
127-146.1
6-7 3/4
152.4-193.7
8 5/8-10...
DDZ series elevator are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons 750 tons. The size ranges from 2 3/8” to 6 5/8”. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
Model
Size(in)
Rated Cap(Short Tons)
Remark
DDZ-100
2 3/8-5
100
MG
DDZ-15...
Type Q60-273/48(2 3/8-10 3/4in)WWB Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws.
Technical Parameters
No.of Latch Lug Jaws
Size Pange
Rated Torque
mm
in
KN·m
1#
60.3-95.25
2 3/8-3 3/4
48
2#
88.9-117.48
3 1/2-4 5/8
3#
114.3-146.05
4 1/2-4 5/8
4#
133,.35-184.15
5 1/2-5 3/4
5#
174.63-219.08
6 7/8...