Discount Price Maxim Hammer Drill Machine - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS
Discount Price Maxim Hammer Drill Machine - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS Detail:
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore.
• It can be equipped with top drive device.
• It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted.
Type and Main Parameters of DC Drive Drilling Rig:
| Type |
ZJ40/2250DZ |
ZJ50/3150DZ |
ZJ70/4500DZ |
ZJ90/6750DZ |
|||
| Nominal drilling depth（114mm drill pipe） |
2500—4000 |
3500—5000 |
4500—7000 |
6000—9000 |
|||
| Max. hook load, KN |
2250 |
3150 |
4500 |
6750 |
|||
| Max. line number of traveling system |
10 |
12 |
12 |
14 |
|||
| mm(in)
Drilling wire Dia. |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
45(1 3/4) |
|||
| Sheave OD of traveling system |
1120(44) |
1270(50) |
1524(60) |
1524(60) |
|||
| Swivel stem through-hole Dia. |
75(3) |
75(3) |
75(3) |
102(4) |
|||
| Rated power of drawwork KW(hp) |
735(1000) |
1100(1500) |
1470(2000) |
2210(3000) |
|||
| Drawwork shifts |
4 |
4 |
4 |
4 |
|||
| Opening Dia. of rotary table |
698.5(27 1/2) |
698.5 (27 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
1257.3 (49 1/2) |
|
| Rotary table shifts |
2 |
2 |
2 |
2 |
|||
| Single mud pump power |
960(1300) |
960 (1300) |
1180 (1600) |
1180 (1600) |
1620 (2200) |
||
| Mast working height |
43(142) |
45(147) |
45(147) |
48(157) |
|||
| Drill floor height |
7.5(25) |
7.5(25) |
9(30) |
9(30) |
10.5 (35) |
10.5 (35) |
12(40) |
| Clear height of drill floor |
6.26(20.5) |
6.26 (20.5) |
7.62 (25) |
7.42(24.5) |
8.92(29.5) |
8.7 (28.5) |
10(33) |
| Note |
DZ——DC drive drilling rig |
||||||
Product detail pictures:
Related Product Guide:
Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Discount Price Maxim Hammer Drill Machine - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS , The product will supply to all over the world, such as: Austria, Somalia, El Salvador, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Mike from Accra - 2018.12.11 11:26
Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.
By Gladys from Italy - 2018.12.05 13:53
Related products
-
Free Sample For Star Drill Bit - Truck-Mounted...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...
-
High Performance Water Ace Pump Parts - TESCO ...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
Discount Wholesale Tiger Drill Machine Price -...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
New Delivery For Barma Machine Price - VARCO (...
VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...
-
Low MOQ For Sds Max Drill Bits - Truck-Mounted...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...
-
Good User Reputation For Automatic Water Pump -...
TPEC Top Drive Spare Parts list: PN. Name 1.07.14.001 Brake block 1.07.08.002 key 2.3.04.003 Brake (bracket) 2.4.25.011 Steel pipe u 2.4.25.025 Steel pipe (H) 2.4.25.013 Steel pipe П 2.4.34.073 Fittings, cross-over sub 2.4.34.047 Fittings, cross-over sub 2.4.34.074 Fittings, four-way sub 2.4.34.089 Pipe fitting,tee sub 1.10.05.007 pulley 1.03.15.204 Lock nut 1.08.10.005 IBOP actuator 1.08.03.013 Upper IBOP 1.08.04.008 Lower IBOP 2.4.25.028 Steel pipe 2.4.25.018 Steel pipe c 2.4.25.027 Steel p...