Factory Source Dentist Drill - Truck-Mounted Rig for Oil Well Drlling – VS
Factory Source Dentist Drill - Truck-Mounted Rig for Oil Well Drlling – VS Detail:
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc.
|
Rig type |
ZJ10/600 |
ZJ15/900 |
ZJ20/1350 |
ZJ30/1800 |
ZJ40/2250 |
|
|
Nominal drilling depth, m |
127mm(5″) DP |
500~800 |
700~1400 |
1100~1800 |
1500~2500 |
2000~3200 |
|
114mm(41/2″) DP |
500~1000 |
800~1500 |
1200~2000 |
1600~3000 |
2500~4000 |
|
|
Max. hook load, kN(t) |
600(60) |
900(90) |
1350(135) |
1800(180) |
2250(225) |
|
|
Drawworks |
Type |
Single drum / Double drum |
||||
|
Power, kW |
110-200 |
257-330 |
330-500 |
550 |
735 |
|
|
Drawworks lifting shifts |
5+1R |
|||||
|
Brake type |
Belt brake /Disc brake+ Rotor hydromatic brake/ Push disc water cooled brake |
|||||
|
Line number of traveling system |
Drilling line number |
6 |
8 |
|||
|
Max. line number |
8 |
10 |
||||
|
Drilling wire Dia., mm(in) |
22(7/8), 26(1) |
26(1) |
29(1 1/8) |
29(1 1/8) |
32(1 1/4) |
|
|
Rotary table opening Dia., mm (in) |
445(17 1/2), 520(20 1/2) |
520(20 1/2), 698.5(27 1/2) |
||||
|
Drill floor height, m |
3, 4, 4.5 |
4, 4.5, 5 |
4, 5 |
5, 6 |
6, 7 |
|
|
Mast type |
Mast type double section hydraulic raising |
|||||
|
Mast height, m |
31, 33, 35 |
33, 35 |
36, 38 |
38, 39 |
||
|
Max. speed, km/h |
45 |
|||||
|
Chassis drive type |
10×8 |
12×8 |
14×8 |
14×10 |
||
|
Note: The data in the table permit changing relevant parameters as per customers’ request, and will be executed as agreed by both parties. |
||||||
Product detail pictures:
Related Product Guide:
It is a good way to enhance our products and solutions and repair. Our mission will be to build creative solutions to consumers with a great experience for Factory Source Dentist Drill - Truck-Mounted Rig for Oil Well Drlling – VS , The product will supply to all over the world, such as: Manila, Bolivia, Uruguay, We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products' quality, you can return within 7days with their original states.
By Gwendolyn from Czech Republic - 2018.07.12 12:19
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Lynn from Sydney - 2017.04.18 16:45
Related products
-
One Of Hottest For 140a C Asa11 - CANRIG Top D...
Canrig Top Drive Spare Parts list: E14231 Cable N10007 Temperature Sensor N10338 Display Module N10112 Module E19-1012-010 Relay E10880 Relay N21-3002-010 Analog input module N10150 CPU M01-1001-010 “BRG,TPRD ROL,CUPCANRIGM01-1001-010 1EA M01-1063-040, AS A SET, REPLACES BOTH THE M01-1000-010 AND M01-1001-010 (M01-1001-010 HAS BECOME OBSOLETE)” M01-1002-010 BRG, TPRD ROL, CONE, 9.0 x 19.25 x 4.88 M01-1003-010 BRG, TPRD ROL, CUP, 9.0 x 19.25 x 4.88 829-18-0 PLATE, RETAINING, BUW S0...
-
New Delivery For Water Lift Pump - BPMC Top Dr...
BPM Top Drive Spare Parts list: P/N. Specification 602020210 Flat Steel Wire Cylindrical Spiral Compression Spring 602020400 flat wire cylindroid helical-coil compression spring 970203005 Gooseneck (inch) for DQ70BSC BPM top Drive 970351002 Lock,device upper 970351003 Lock,device lower 1502030560 1705000010 1705000140 Sealant 1705000150 Thread Glue 2210170197 2210270197 IBOP 3101030170 flame-proof motor 3101030320 BPM EXPLN SUPPR MOTOR 3101030320 3101030430 flame-proof motor 3301010038 Proxim...
-
Short Lead Time For Ice Auger For Cordless Dril...
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ Nominal drilling...
-
Factory Cheap Hot 16mm Masonry Drill Bit - Wor...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...
-
Factory Free Sample Eon Power Drill Machine - ...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
Quality Inspection For Temperature Control Cabl...
Centrifuge is one of the important equipment of solid control. It is mainly used for removal of tiny harmful solid phase in drilling fluid. It can be also used for centrifugal sedimentation, drying, and unloading etc. Technical Features： • Compact structure, easy operation, strong working ability of single machine, and high separation quality. • Set vibration isolation structure to reduce complete machine’s vibration, with low noise and long time of trouble-free operation. • Set overload pr...