Good Quality Speed Drill - Mechanical Drive Drilling Rig – VS
Good Quality Speed Drill - Mechanical Drive Drilling Rig – VS Detail:
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth.
Mechanical Drive Drilling Rig Basic Parameters:
|
Type |
ZJ20/1350L(J) |
ZJ30/1700L(J) |
ZJ40/2250L(J) |
ZJ50/3150L(J) |
ZJ70/4500L |
||
|
Nominal drilling depth |
1200—2000 |
1600—3000 |
2500—4000 |
3500—5000 |
4500—7000 |
||
|
Max. hook load KN |
1350 |
1700 |
2250 |
3150 |
4500 |
||
|
Max. line number of traveling system |
8 |
10 |
10 |
12 |
12 |
||
|
Drilling wire Dia. mm(in) |
29(1 1/8) |
32(1 1/4) |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
||
|
Sheave OD of traveling system mm |
915 |
915 |
1120 |
1270 |
1524 |
||
|
Swivel stem through-hole Dia. mm(in) |
64 ( 2 1/2) |
64 ( 2 1/2) |
75 ( 3 ) |
75 ( 3 ) |
75 ( 3) |
||
|
Rated power of drawworks KW（hp） |
400(550) |
550(750) |
735(1000) |
1100(1500) |
1470(2000) |
||
|
Drawworks shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6 forward+
2 reverse |
4forward+ 2 reverse |
6 forward+ 2reverse |
6 forward+ 2reverse |
|
Opening Dia. of rotary table mm(in) |
445(17 1/2) |
520.7(20 1/2) 698.5(27 1/2) |
698.5(27 1/2) |
698.5(27 1/2) 952.5(37 1/2) |
952.5(37 1/2) |
||
|
Rotary table shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
6 forward+ 2reverse |
|
Single mud pump power kW(hp) |
735(1000) |
735(1000) |
960(1300) |
1180(1600) |
1180(1600) |
||
|
Transmission number |
2 |
2 |
3 |
3 |
4 |
||
|
Mast working height m(ft) |
31.5（103） |
31.5（103） |
43（141） |
45（147.5） |
45（147.5） |
||
|
Drill floor height m(ft)
|
4.5（14.8） |
4.5（14.8） |
6 （19.7） |
7.5（ 24.6 ） |
9（29.5） |
||
|
Clear height of drill floor m(ft) |
3.54（11.6） |
3.44（11.3） |
4.7（15.4） |
6.26（20.5）
|
7.7（25.3）
|
||
|
Note |
L—Chain compounding drive, J—Narrow V belt compounding drive |
||||||
Product detail pictures:
Related Product Guide:
Our enterprise since its inception, usually regards product top quality as business life, repeatedly enhance manufacturing technology, make improvements to product excellent and continuously strengthen enterprise total high quality administration, in strict accordance with all the national standard ISO 9001:2000 for Good Quality Speed Drill - Mechanical Drive Drilling Rig – VS , The product will supply to all over the world, such as: Niger, Burundi, Cancun, Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
By Ada from Sweden - 2017.08.16 13:39
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Janet from Oman - 2018.02.21 12:14
Related products
-
Manufacturing Companies For Right Angle Drill -...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
Factory Price 22477525 - TOP DRIVE IBOP –...
NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99497) 110186 CYLINDER,ACTU...
-
2022 China New Design Quarter Inch Drill Bit -...
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ Nominal drilling...
-
Professional Design Pressure Switch Well Pump -...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
New Delivery For Is200tturh1c - HH Top Drive S...
HH Top Drive Spares Parts list: Die plate 3.5 “dq020.01.12.01 № 1200437624 dq500z Die plate 4,5 “№ 1200437627 dq020.01.13.01 dq500z Die plate 5,5 “№ 1200440544 dq020.01.14.01 dq500z Die plate 6-5 / 8 “dq027.01.09.02 № 1200529267 dq500z Jaw plate 120-140 3,5 “dq026.01.09.02 № 1200525399 Jaw plate 160-180 4,5 “dq026.01.07.02 № 1200525393 dq500z Jaw plate 180-200 5,5 “№ 1200525396 dq026.01.08.02 dq500z Die bracket 6-5 / 8 “dq027.01.09.03 № 12005292...
-
Super Lowest Price Horizontal Boring - VARCO (...
VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...