Manufactur Standard End Mill Drill Bit - Mechanical Drive Drilling Rig – VS
Manufactur Standard End Mill Drill Bit - Mechanical Drive Drilling Rig – VS Detail:
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth.
Mechanical Drive Drilling Rig Basic Parameters:
|
Type |
ZJ20/1350L(J) |
ZJ30/1700L(J) |
ZJ40/2250L(J) |
ZJ50/3150L(J) |
ZJ70/4500L |
||
|
Nominal drilling depth |
1200—2000 |
1600—3000 |
2500—4000 |
3500—5000 |
4500—7000 |
||
|
Max. hook load KN |
1350 |
1700 |
2250 |
3150 |
4500 |
||
|
Max. line number of traveling system |
8 |
10 |
10 |
12 |
12 |
||
|
Drilling wire Dia. mm(in) |
29(1 1/8) |
32(1 1/4) |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
||
|
Sheave OD of traveling system mm |
915 |
915 |
1120 |
1270 |
1524 |
||
|
Swivel stem through-hole Dia. mm(in) |
64 ( 2 1/2) |
64 ( 2 1/2) |
75 ( 3 ) |
75 ( 3 ) |
75 ( 3) |
||
|
Rated power of drawworks KW（hp） |
400(550) |
550(750) |
735(1000) |
1100(1500) |
1470(2000) |
||
|
Drawworks shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6 forward+
2 reverse |
4forward+ 2 reverse |
6 forward+ 2reverse |
6 forward+ 2reverse |
|
Opening Dia. of rotary table mm(in) |
445(17 1/2) |
520.7(20 1/2) 698.5(27 1/2) |
698.5(27 1/2) |
698.5(27 1/2) 952.5(37 1/2) |
952.5(37 1/2) |
||
|
Rotary table shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
6 forward+ 2reverse |
|
Single mud pump power kW(hp) |
735(1000) |
735(1000) |
960(1300) |
1180(1600) |
1180(1600) |
||
|
Transmission number |
2 |
2 |
3 |
3 |
4 |
||
|
Mast working height m(ft) |
31.5（103） |
31.5（103） |
43（141） |
45（147.5） |
45（147.5） |
||
|
Drill floor height m(ft)
|
4.5（14.8） |
4.5（14.8） |
6 （19.7） |
7.5（ 24.6 ） |
9（29.5） |
||
|
Clear height of drill floor m(ft) |
3.54（11.6） |
3.44（11.3） |
4.7（15.4） |
6.26（20.5）
|
7.7（25.3）
|
||
|
Note |
L—Chain compounding drive, J—Narrow V belt compounding drive |
||||||
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm to the long-term to develop together with consumers for mutual reciprocity and mutual advantage for Manufactur Standard End Mill Drill Bit - Mechanical Drive Drilling Rig – VS , The product will supply to all over the world, such as: Mombasa, Malaysia, Palestine, As an experienced manufacturer we also accept customized order and we could make it the same as your picture or sample specification. The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
By olivier musset from Senegal - 2017.03.07 13:42
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Nana from Angola - 2017.04.18 16:45
Related products
-
Manufacturer Of Yy Cable - TESCO Top Drive Sys...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
Best Quality Spade Bit Set - HH Top Drive Syst...
HH Top Drive Spares Parts list: Die plate 3.5 “dq020.01.12.01 № 1200437624 dq500z Die plate 4,5 “№ 1200437627 dq020.01.13.01 dq500z Die plate 5,5 “№ 1200440544 dq020.01.14.01 dq500z Die plate 6-5 / 8 “dq027.01.09.02 № 1200529267 dq500z Jaw plate 120-140 3,5 “dq026.01.09.02 № 1200525399 Jaw plate 160-180 4,5 “dq026.01.07.02 № 1200525393 dq500z Jaw plate 180-200 5,5 “№ 1200525396 dq026.01.08.02 dq500z Die bracket 6-5 / 8 “dq027.01.09.03 № 12005292...
-
Trending Products Best Hammer Drill Machine - ...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
8 Year Exporter Mcscj115ag000010 - VARCO (NOV)...
VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...
-
Good Quality Geared Pillar Drill - Mechanical ...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
Top Quality Corded Drill Machine - Truck-Mount...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...