Massive Selection For 6 Inch Diamond Core Drill Bit - Truck-Mounted Rig for Oil Well Drlling – VS
Massive Selection For 6 Inch Diamond Core Drill Bit - Truck-Mounted Rig for Oil Well Drlling – VS Detail:
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc.
|
Rig type |
ZJ10/600 |
ZJ15/900 |
ZJ20/1350 |
ZJ30/1800 |
ZJ40/2250 |
|
|
Nominal drilling depth, m |
127mm(5″) DP |
500~800 |
700~1400 |
1100~1800 |
1500~2500 |
2000~3200 |
|
114mm(41/2″) DP |
500~1000 |
800~1500 |
1200~2000 |
1600~3000 |
2500~4000 |
|
|
Max. hook load, kN(t) |
600(60) |
900(90) |
1350(135) |
1800(180) |
2250(225) |
|
|
Drawworks |
Type |
Single drum / Double drum |
||||
|
Power, kW |
110-200 |
257-330 |
330-500 |
550 |
735 |
|
|
Drawworks lifting shifts |
5+1R |
|||||
|
Brake type |
Belt brake /Disc brake+ Rotor hydromatic brake/ Push disc water cooled brake |
|||||
|
Line number of traveling system |
Drilling line number |
6 |
8 |
|||
|
Max. line number |
8 |
10 |
||||
|
Drilling wire Dia., mm(in) |
22(7/8), 26(1) |
26(1) |
29(1 1/8) |
29(1 1/8) |
32(1 1/4) |
|
|
Rotary table opening Dia., mm (in) |
445(17 1/2), 520(20 1/2) |
520(20 1/2), 698.5(27 1/2) |
||||
|
Drill floor height, m |
3, 4, 4.5 |
4, 4.5, 5 |
4, 5 |
5, 6 |
6, 7 |
|
|
Mast type |
Mast type double section hydraulic raising |
|||||
|
Mast height, m |
31, 33, 35 |
33, 35 |
36, 38 |
38, 39 |
||
|
Max. speed, km/h |
45 |
|||||
|
Chassis drive type |
10×8 |
12×8 |
14×8 |
14×10 |
||
|
Note: The data in the table permit changing relevant parameters as per customers’ request, and will be executed as agreed by both parties. |
||||||
Product detail pictures:
Related Product Guide:
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Massive Selection For 6 Inch Diamond Core Drill Bit - Truck-Mounted Rig for Oil Well Drlling – VS , The product will supply to all over the world, such as: New Zealand, Johor, Paraguay, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.
By Flora from Singapore - 2018.12.11 11:26
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Madeline from Munich - 2017.11.29 11:09
Related products
-
Short Lead Time For Rig A Lite - Truck-Mounted...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...
-
2022 Latest Design Hand Fluid Pump - API 7K Sa...
Safety Clamps are tools for handling flush joint pipe and drill collar. There are three types of safety clamps: Type WA-T, Type WA-C and Type MP. Technical Parameters Model pipe O.D.(in) No. of Chain links Model pipe O.D.(in) No. ofChain links WA-T 1 1/8-2 4 MP-S 2 7/8-4 1/8 7 4-5 8 MP-R 4 1/2-5 5/8 7 2 1/8-3 1/4 5 5 1/2-7 8 6 3/4-8 1/4 9 3 1/2-4 1/2 6 9 1/4-10 1/2 10 MP-M 10 1/2-11 1/2 11 WA-C 3 1/2-4 5/8 7 11 1/2-12 1/2 12 4 1/2-5 5/8 8 12 1/2-13 1/2 13 5 1/2-6 5/8 9...
-
Factory Directly Baldor Cm3558t - TESCO Top Dr...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
China OEM Deep Well Drilling Machine - Workove...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...
-
Factory Price For Flexible Drill Bit - Mechani...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
New Delivery For Tapping With A Drill Press - ...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...