OEM/ODM Supplier Square Hole Drill Bit - Mechanical Drive Drilling Rig – VS
OEM/ODM Supplier Square Hole Drill Bit - Mechanical Drive Drilling Rig – VS Detail:
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth.
Mechanical Drive Drilling Rig Basic Parameters:
|
Type |
ZJ20/1350L(J) |
ZJ30/1700L(J) |
ZJ40/2250L(J) |
ZJ50/3150L(J) |
ZJ70/4500L |
||
|
Nominal drilling depth |
1200—2000 |
1600—3000 |
2500—4000 |
3500—5000 |
4500—7000 |
||
|
Max. hook load KN |
1350 |
1700 |
2250 |
3150 |
4500 |
||
|
Max. line number of traveling system |
8 |
10 |
10 |
12 |
12 |
||
|
Drilling wire Dia. mm(in) |
29(1 1/8) |
32(1 1/4) |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
||
|
Sheave OD of traveling system mm |
915 |
915 |
1120 |
1270 |
1524 |
||
|
Swivel stem through-hole Dia. mm(in) |
64 ( 2 1/2) |
64 ( 2 1/2) |
75 ( 3 ) |
75 ( 3 ) |
75 ( 3) |
||
|
Rated power of drawworks KW（hp） |
400(550) |
550(750) |
735(1000) |
1100(1500) |
1470(2000) |
||
|
Drawworks shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6 forward+
2 reverse |
4forward+ 2 reverse |
6 forward+ 2reverse |
6 forward+ 2reverse |
|
Opening Dia. of rotary table mm(in) |
445(17 1/2) |
520.7(20 1/2) 698.5(27 1/2) |
698.5(27 1/2) |
698.5(27 1/2) 952.5(37 1/2) |
952.5(37 1/2) |
||
|
Rotary table shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
6 forward+ 2reverse |
|
Single mud pump power kW(hp) |
735(1000) |
735(1000) |
960(1300) |
1180(1600) |
1180(1600) |
||
|
Transmission number |
2 |
2 |
3 |
3 |
4 |
||
|
Mast working height m(ft) |
31.5（103） |
31.5（103） |
43（141） |
45（147.5） |
45（147.5） |
||
|
Drill floor height m(ft)
|
4.5（14.8） |
4.5（14.8） |
6 （19.7） |
7.5（ 24.6 ） |
9（29.5） |
||
|
Clear height of drill floor m(ft) |
3.54（11.6） |
3.44（11.3） |
4.7（15.4） |
6.26（20.5）
|
7.7（25.3）
|
||
|
Note |
L—Chain compounding drive, J—Narrow V belt compounding drive |
||||||
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Excellent, Reasonable Rate and Efficient Service" for OEM/ODM Supplier Square Hole Drill Bit - Mechanical Drive Drilling Rig – VS , The product will supply to all over the world, such as: South Korea, United States, Kuwait, Welcome to visit our company, factory and our showroom where displays various hair products that will meet your expectation. Meanwhile, it is convenient to visit our website, and our sales staff will try their best to provide you the best service. Please contact us if you need more information. Our aim is to help customers realize their goals. We are making great efforts to achieve this win-win situation.
By Hannah from Iraq - 2018.04.25 16:46
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Hazel from Honduras - 2017.08.18 11:04
Related products
-
Factory Promotional 45c322 - TESCO Top Drive S...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
Professional Factory For Single Acting Hydrauli...
NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99497) 110186 CYLINDER,ACTU...
-
OEM Supply Borehole Drilling Machine For Sale -...
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ Nominal drilling...
-
Professional China 14mm Masonry Drill Bit - AC...
• Drawworks adopt main motor or independent motor to achieve automatic drilling and make real time monitoring for tripping operation and drilling condition. • Intelligent traveling block position control has the function of preventing “bumping top and smashing bottom”. • The drilling rig is equipped with independent driller control room. The gas, electric and hydraulic control, drilling parameters and instrument displays can be arranged unitedly so that it can achieve logic control, monitorin...
-
PriceList For Grinder And Drill Set Price - Me...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
China Gold Supplier For Thermal Friction Drill ...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...