Quality Inspection For Drilling Pump Gasket - AC VF Drive Drlling Rig 1500-7000m – VS
Quality Inspection For Drilling Pump Gasket - AC VF Drive Drlling Rig 1500-7000m – VS Detail:
• Drawworks adopt main motor or independent motor to achieve automatic drilling and make real time monitoring for tripping operation and drilling condition.
• Intelligent traveling block position control has the function of preventing “bumping top and smashing bottom”.
• The drilling rig is equipped with independent driller control room. The gas, electric and hydraulic control, drilling parameters and instrument displays can be arranged unitedly so that it can achieve logic control, monitoring and protection through PLC during the whole drilling. In the mean time, it can also achieve saving, printing and remote transmission of the data. Driller can accomplish all operations in the room which can improve the working environment and decrease the labour intensity of drillers.
• It can be equipped with top drive device.
• It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted.
Type and Main Parameters:
|
Type |
ZJ40/2250DB |
ZJ50/3150DB |
ZJ70/4500DB |
ZJ90/6750DB |
|||
|
Nominal drilling depth |
2500—4000 |
3500—5000 |
4500—7000 |
6000—9000 |
|||
|
Max. hook load KN |
2250 |
3150 |
4500 |
6750 |
|||
|
Max. line number of traveling system |
10 |
12 |
12 |
14 |
|||
|
Drilling wire Dia. |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
45(1 3/4) |
|||
|
Sheave OD of traveling system mm(in) |
1120(44) |
1270(50) |
1524(60) |
1524(60) |
|||
|
Swivel stem through-hole Dia. mm(in) |
75(3) |
75(3) |
75(3) |
102(4) |
|||
|
Rated power of drawworks KW(hp) |
735(1000) |
1100(1500) |
1470(2000) |
2210(3000) |
|||
|
Drawwork shifts |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
|||
|
Opening Dia. of rotary table mm(in) |
698.5(27 1/2) |
698.5(27 1/2) |
952.5(37 1/2) |
952.5(37 1/2) |
952.5(37 1/2) |
1257.3(49 1/2) |
|
|
Rotary table shifts |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
|||
|
Single mud pump power kW(hp) |
960 (1300) |
960 (1300) |
1180 (1600) |
1180 (1600) |
1180 (1600) |
1620 (2200) |
|
|
Mast working height m(ft) |
43(142) |
45(147) |
45(147) |
48(157) |
|||
|
Drill floor height m(ft) |
7.5(25) |
7.5(25) |
9(30) |
9(30) |
10.5(35) |
10.5(35) |
12(40) |
|
Clear height of drill floor m(ft)
|
6.26 (20.5) |
6.26 (20.5) |
7.62 (25) |
7.62 (25) |
8.9 (29.5) |
8.7 (28.5) |
10 (33) |
|
Note |
AC variable frequency drive drilling rig |
||||||
Product detail pictures:
Related Product Guide:
"Quality very first, Honesty as base, Sincere assistance and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for Quality Inspection For Drilling Pump Gasket - AC VF Drive Drlling Rig 1500-7000m – VS , The product will supply to all over the world, such as: Oslo, Sheffield, Panama, Hard work to keep making progress, innovation in the industry, make every effort to first-class enterprise. We try our best to build the scientific management model, to learn abundant professional knowledge, to develop advanced production equipment and production process , to create the first-call quality products, reasonable price , high quality of service , quick delivery , to give you create new value .
By Helen from Nigeria - 2018.12.22 12:52
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Ryan from Ghana - 2017.09.30 16:36
Related products
-
Special Design For 1810502c92 - TOP DRIVE IBOP...
NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99497) 110186 CYLINDER,ACTU...
-
Good Wholesale Vendors Best Drill Machine Under...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
Europe Style For Fann Filter Press - TPEC Top ...
TPEC Top Drive Spare Parts list: PN. Name 1.07.14.001 Brake block 1.07.08.002 key 2.3.04.003 Brake (bracket) 2.4.25.011 Steel pipe u 2.4.25.025 Steel pipe (H) 2.4.25.013 Steel pipe П 2.4.34.073 Fittings, cross-over sub 2.4.34.047 Fittings, cross-over sub 2.4.34.074 Fittings, four-way sub 2.4.34.089 Pipe fitting,tee sub 1.10.05.007 pulley 1.03.15.204 Lock nut 1.08.10.005 IBOP actuator 1.08.03.013 Upper IBOP 1.08.04.008 Lower IBOP 2.4.25.028 Steel pipe 2.4.25.018 Steel pipe c 2.4.25.027 Steel p...
-
High Performance Water Ace Pump Parts - VARCO ...
VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...
-
Good Quality Ipd12322230 - HH Top Drive System...
HH Top Drive Spares Parts list: Die plate 3.5 “dq020.01.12.01 № 1200437624 dq500z Die plate 4,5 “№ 1200437627 dq020.01.13.01 dq500z Die plate 5,5 “№ 1200440544 dq020.01.14.01 dq500z Die plate 6-5 / 8 “dq027.01.09.02 № 1200529267 dq500z Jaw plate 120-140 3,5 “dq026.01.09.02 № 1200525399 Jaw plate 160-180 4,5 “dq026.01.07.02 № 1200525393 dq500z Jaw plate 180-200 5,5 “№ 1200525396 dq026.01.08.02 dq500z Die bracket 6-5 / 8 “dq027.01.09.03 № 12005292...
-
2022 Latest Design Best Electric Drill - Mecha...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...