Rotary Table for Oil Drilling Rig
Technical Features：
• The transmission of rotary table adopts spiral bevel gears which have strong bearing capacity, smooth operation and long service life.
• The shell of rotary table uses cast-weld structure with good rigidity and high precision.
• The gears and bearings adopt reliable splash lubrication.
• The barrel type structure of the input shaft is easy to repair and replace.
Technical Parameters:
|
Model |
ZP175 |
ZP205 |
ZP275 |
ZP375 |
ZP375Z |
ZP495 |
ZP650Y |
|
Dia. of opening, mm(in) |
444.5 (17 1/2) |
520.7 (20 1/2) |
698.5 (27 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
1257.3 (49 1/2) |
1536.7 (60 1/2) |
|
Rated static load, kN(kips) |
2700 (607.0) |
3150 (708.1) |
4500 (1011.6) |
5850 (1315.1) |
7250 (1629.9) |
9000 (2023.3) |
11250 (2529.1) |
|
Max.working torque, N.m (ft.lb) |
13729 (10127) |
22555 (16637) |
27459 (6173) |
32362 (20254) |
45000 (33192) |
64400 (47501) |
70000 (1574) |
|
Distance from RT center to that of inner row sprocket, mm(in) |
1118 (44) |
1353 (53 1/4) |
1353 (53 1/4) |
1353 (53 1/4) |
1353 (53 1/4) |
1651 (65) |
---- |
|
Gear ratio |
3.75 |
3.22 |
3.67 |
3.56 |
3.62 |
4.0883 |
3.97 |
|
Max. Speed, r/min |
300 |
300 |
300 |
300 |
300 |
300 |
20 |
|
Input shaft center height, mm(in) |
260.4(10.3) |
318(12.5) |
330(13.0) |
330(13.0) |
330(13.0) |
368(14.5) |
---- |
|
Overall dimension, mm(in) (L×W×H) |
1972×1372×566 (77.6×54.0×22.3) |
2266×1475×704 (89.2×58.1×27.7) |
2380×1475×690 (93.7×58.1×27.2) |
2468×1920×718 (97.2×75.6×28.3) |
2468×1810×718 (97.2×71.3×28.3) |
3015×2254×819 (118.7×88.7×32.2) |
3215×2635×965 (126.6×103.7×38.0) |
|
Net weight (including master bushing and excluding chain sprocket), kg(lbs) |
4172 (9198) |
5662 (12483) |
6122 (13497) |
7970 (17571) |
9540 (21032) |
11260 (24824) |
27244 (60063) |
Related products
-
AC Variable Frequency Drive Drawworks
• The main components of drawworks are AC variable frequency motor, gear reducer, hydraulic disc brake, winch frame, drum shaft assembly and automatic driller etc, with high gear transmission efficiency. • The gear is thin oil lubricated. • Drawwork is of single drum shaft structure and the drum is grooved. Compared with similar drawworks, it is of many merits, such as simple structure, small volume, and light weight. • It’s AC variable frequency motor drive and step...
-
F Series Mud Pump for oil field fluid control
F series mud pumps are firm and compact in structure and small in size, with good functional performances, which can adapt to drilling technological requirements such as oilfield high pump pressure and large displacement etc. The F series mud pumps can be maintained at lower stroke rate for their long stroke, which effectively improves the feeding water performance of mud pumps and prolongs the service life of the fluid end. The suction stabilizer, with advanced stru...
-
Traveling Block of oil drilling rigs high weigh...
Technical Features： • The Traveling Block is an important key equipment in the workover operation. Its main function is to form a pulley block by the sheaves of the Traveling Block and the mast , double the pulling force of the drilling rope, and bear all the downhole drill pipe or oil pipe and workover instruments through the hook. • The sheave grooves are quenched to resist wear and extend their service life. • The sheaves and bearings are interchangeable with th...
-
3NB Series Mud Pump for oil field fluid control
Product Introduction: 3NB series mud pump includes：3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600, 3NB-2200. 3NB series mud pumps are inclusive of 3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600 and 3NB-2200. Model 3NB-350 3NB-500 3NB-600 3NB-800 Type Triplex single acting Triplex single acting Triplex single acting Triplex single acting Output power 257kw/350HP 368kw/500HP 441kw/600HP 588kw/800H...
-
DC Drive Drawworks of Drilling Rigs High Load C...
Bearings all adopt roller ones and shafts are made of premium alloy steel. Driving chains with high accuracy and high strength are forced lubricated. The main brake adopts hydraulic disc brake, and the brake disc is water or air cooled. The auxiliary brake adopts electromagnetic eddy current brake(water or air cooled) or pneumatic push disc brake. Basic Parameters of DC Drive Drawworks: Model of rig JC40D JC50D JC70D Nominal drilling depth, m(ft) with...
-
Hook Block Assembly of Drill Rig high weight li...
1. The hook block adopt the integrated design. The traveling block and the hook are connected by the intermediate bearing body, and the big hook and the cruiser can be separately repaired. 2. The inner and outer springs of the bearing body are reversed in opposite directions, which overcomes the torsion force of a single spring during compression or stretching. 3. The overall size is small, the structure is compact, and the combined length is shortened, which is suit...