Short Lead Time For Surface Drilling Machine - Truck-Mounted Rig for Oil Well Drlling – VS

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for 12 Volt Oil Pump, Drilling Tong Jaw And Die, CMC HV, We warmly welcome all perspective inquiries from home and abroad to cooperate with us, and look forward to your correspondence.
Short Lead Time For Surface Drilling Machine - Truck-Mounted Rig for Oil Well Drlling – VS Detail:

Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc.

Rig type

ZJ10/600

ZJ15/900

ZJ20/1350

ZJ30/1800

ZJ40/2250

Nominal drilling depth, m

127mm(5″) DP

500~800

700~1400

1100~1800

1500~2500

2000~3200

114mm(41/2″) DP

500~1000

800~1500

1200~2000

1600~3000

2500~4000

Max. hook load, kN(t)

600(60)

900(90)

1350(135)

1800(180)

2250(225)

Drawworks

Type

Single drum / Double drum

Power, kW

110-200

257-330

330-500

550

735

Drawworks lifting shifts

5+1R

Brake type

Belt brake /Disc brake+ Rotor hydromatic brake/

Push disc water cooled brake

Line number of traveling system

Drilling line number

6

8

Max. line number

8

10

Drilling wire Dia., mm(in)

22(7/8), 26(1)

26(1)

29(1 1/8)

29(1 1/8)

32(1 1/4)

Rotary table opening Dia., mm (in)

445(17 1/2), 520(20 1/2)

520(20 1/2), 698.5(27 1/2)

Drill floor height, m

3, 4, 4.5

4, 4.5, 5

4, 5

5, 6

6, 7

Mast type

Mast type double section hydraulic raising

Mast height, m

31, 33, 35

33, 35

36, 38

38, 39

Max. speed, km/h

45

Chassis drive type

10×8

12×8

14×8

14×10

Note: The data in the table permit changing relevant parameters as per customers’ request, and will be executed as agreed by both parties.


Product detail pictures:

Short Lead Time For Surface Drilling Machine - Truck-Mounted Rig for Oil Well Drlling – VS detail pictures


Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Short Lead Time For Surface Drilling Machine - Truck-Mounted Rig for Oil Well Drlling – VS , The product will supply to all over the world, such as: Tunisia, Lyon, Wellington, Our staffs are adhering to the "Integrity-based and Interactive Development" spirit, and the tenet of "First-class Quality with Excellent Service". According to the needs of every customer, we provide customized & personalized services to help customers achieve their goals successfully. Welcome clients from home and abroad to call and inquire!
  • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Molly from Berlin - 2017.08.21 14:13
    It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Susan from Canberra - 2018.12.11 14:13
    Write your message here and send it to us

    Related products

    • Factory Wholesale Digital Drill Press - Truck-Mounted Rig for Oil Well Drlling – VS

      Factory Wholesale Digital Drill Press - Truck-...

      Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...

    • Special Design For Panametrics At868 - TOP DRIVE IBOP – VS

      Special Design For Panametrics At868 - TOP DRI...

      NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99497) 110186 CYLINDER,ACTU...

    • Free Sample For Hydraulic Drill - Workover Rig for plugging back, pulling and resetting liners etc. – VS

      Free Sample For Hydraulic Drill - Workover Rig...

      General Description: Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...

    • Super Purchasing For Best Ps4 Charging Cable - TESCO Top Drive System (TDS) Spare Parts / Accessories – VS

      Super Purchasing For Best Ps4 Charging Cable -...

      TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...

    • High Performance Aux Cord With Volume Control - Centrifuge for oil field Solids Control / Mud Circulation  – VS

      High Performance Aux Cord With Volume Control -...

      Centrifuge is one of the important equipment of solid control. It is mainly used for removal of tiny harmful solid phase in drilling fluid. It can be also used for centrifugal sedimentation, drying, and unloading etc.  Technical Features: • Compact structure, easy operation, strong working ability of single machine, and high separation quality. • Set vibration isolation structure to reduce complete machine’s vibration, with low noise and long time of trouble-free operation. • Set overload pr...

    • New Fashion Design For 26000/130 - CANRIG Top Drive (TDS) Spare Parts / Accessories – VS

      New Fashion Design For 26000/130 - CANRIG Top ...

      Canrig Top Drive Spare Parts list: E14231 Cable N10007 Temperature Sensor N10338 Display Module N10112 Module E19-1012-010 Relay E10880 Relay N21-3002-010 Analog input module N10150 CPU M01-1001-010 “BRG,TPRD ROL,CUPCANRIGM01-1001-010 1EA M01-1063-040, AS A SET, REPLACES BOTH THE M01-1000-010 AND M01-1001-010 (M01-1001-010 HAS BECOME OBSOLETE)” M01-1002-010 BRG, TPRD ROL, CONE, 9.0 x 19.25 x 4.88 M01-1003-010 BRG, TPRD ROL, CUP, 9.0 x 19.25 x 4.88 829-18-0 PLATE, RETAINING, BUW S0...