Type QW Pneumatic Power Slips for oil well head operation
Type QW Pneumatic Slip is an ideal wellhead mechanized tool with double functions, it automatically handle the drill pipe when the drilling rig is running in hole or scraping the pipes when the drilling rig is pulling out of hole. It can accommodate different kinds of drilling rig rotary table. And it features convenient installation, easy operation, low labor intensity, and can
Improve the drilling speed.
Technical Parameters
| Model | QW-175 | QW-205（520） | QW-275 | QW-375 | ||
| Rotary table size | ZP175 | ZP205(ZP520) | ZP275 | ZP375 | ||
| Cylinder work pressure | Mpa | 0.6-0.9 | ||||
| Psi | 87-130 | |||||
| Effective gripping length | Mm | 350 | 420 | 420 | 420 | |
| In | 13 3/4 | 16 1/2 | 16 1/2 | 16 1/2 | ||
| Rated length | Kn | 1500 | 2250 | 2250 | 2250 | |
| Height of losing | Mm | ≤300 | ||||
| In | ≤12 | |||||
| Pipe size | In | 3 1/2 4 4 1/2 5 5 1/2 | ||||
| dimension | Mm | ψ443×584 | ψ520×584 | ψ697×581 | ψ481×612 | |
| In | ψ17.5×23 | ψ20.5×23 | ψ27.5×23 | ψ19×24 | ||
| weight | Kg | 440 | 620 | 1020 | 920 | |
| ib | 970 | 1370 | 2250 | 2030 | ||
Related products
-
TQ Hydraulic Power CASING TONG Wellhead tools
Technical Parameters Model TQ178-16 TQ340-20Y TQ340-35 TQ178-16Y TQ340-35Y TQ508-70Y Size range Mm 101.6-178 101.6-340 139.7-340 101.6-178 101.6-340 244.5-508 In 4-7 4-13 3/8 5 1/2-13 3/8 4-7 4-13 3/8 9 5/8-20 Hydraulic system Mpa 18 16 18 18 18 20 Psi 2610 2320 2610 2610 2610 2900
-
API 7K Type CDZ Elevator Wellhead Handling Tools
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling, well construction. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) CDZ-150 2 3/8-5 1/2 150 CDZ-250 2 3/8-5 1/2 250 CDZ-350 2 7/8-5 1/2 350 CDZ-5...
-
API Type C Manual Tongs for Oil Drilling
Type Q60-273/48(2 3/8-10 3/4in)C Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps. Technical Parameters No.of Latch Lug Jaws Short Jaw Hinge Jaw Size Pange Rated Torque / KN·m mm in 1# 2 3/8-7 / 60.33-93.17 2 3/8-3.668 20 2# 73.03-108 2 7/8-4 1/4 3# 88.9-133.35 3 1/2-5 1/4 35 4# 133.35-177...
-
API 7K Type DD Elevator 100-750 tons
Model DD center latch elevators with square shoulder are suitable for handling tubing casing, drill collar, drill pipe, casing and tubing. The load ranges from 150 tons 350 tons. The size ranges from 2 3/8 to 5 1/2 in. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) DP Casing Tubing DD-150 2 3/8-5 1/2 4...
-
API 7K Casing Slips for Drill Handling Tools
Casing Slips can accommodate casing from 4 1/2 inch to 30 inch (114.3-762mm) O.D. Technical Parameters Casing O.D In 4 1/2-5 5 1/2-6 6 5/8 7 7 5/8 8 5/8 Mm 114.3-127 139.7-152.4 168.3 177.8 193.7 219.1 Weight Kg 75 71 89 83.5 75 82 Ib 168 157 196 184 166 181 insert bowl No API or No.3 Casing O.D In 9 5/8 10 3/4 11 3/4 13 3/4 16 18 5/8 20 24 26 30 Mm 244.5 273.1 298.5 339.7 406.4 473.1 508 609.6 660.4 762 Weight Kg 87 95 118 117 140 166.5 174 201 220...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...