TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
| Model | Size(in) | Rated Cap(KN) | |
| in | mm | ||
| SJ | 2 3/8-2 7/8 | 60.3-73.03 | 45 |
| 3 1/2-4 3/4 | 88.9-120.7 | ||
| 5-5 3/4 | 127-146.1 | ||
| 6-7 3/4 | 152.4-193.7 | ||
| 8 5/8-10 3/4 | 219.1-273.1 | ||
| 11 3/4-13 3/8 | 298.5-339.7 | ||
| 13 5/8-14 | 346.1-355.6 | ||
| 16-20 | 406.4-508 | ||
| 21 1/2-24 1/2 | 546.1-622.3 | 60 | |
| 26-28 | 660.4-711.2 | ||
| 30-36 | 762.0-914.4 | ||
Related products
-
API 7K Type CDZ Elevator Wellhead Handling Tools
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling, well construction. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) CDZ-150 2 3/8-5 1/2 150 CDZ-250 2 3/8-5 1/2 250 CDZ-350 2 7/8-5 1/2 350 CDZ-5...
-
API Type C Manual Tongs for Oil Drilling
Type Q60-273/48(2 3/8-10 3/4in)C Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps. Technical Parameters No.of Latch Lug Jaws Short Jaw Hinge Jaw Size Pange Rated Torque / KN·m mm in 1# 2 3/8-7 / 60.33-93.17 2 3/8-3.668 20 2# 73.03-108 2 7/8-4 1/4 3# 88.9-133.35 3 1/2-5 1/4 35 4# 133.35-177...
-
API 7K TYPE B MANUAL TONGS Drill String Handling
Type Q89-324/75(3 3/8-12 3/4 in)B Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque in mm KN·m 5a 1 3 3/8-4 1/8 86-105 55 2 4 1/8-5 1/4 105-133 75 5b 1 4 1/4-5 1/4 108-133 75 2 5-5 3/4 127-146 75 3 6-6 3/4 152-171...
-
API 7K DRILL COLLAR SLIPS for Drilling line Ope...
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D. Technical Parameters slip type drill collar OD weight insert bowl No in mm kg Ib DCS-S 3-46 3/4-8 1/4 76.2-101.6 51 112 API or No.3 4-4 7/8 101.6-123.8 47 103 DCS-R 4 1/2-6 114.3-152.4 54 120 5 1/2-7 139.7-177.8 51 112 DCS-L 6 3/4-8 1/4 171.7-209.6 70 154 8-9 1/2 203.2-241.3 78 173 8 1/2-10 215.9-254 84 185 N...
-
TYPE A DRILL COLLAR SLIPS (WOOLLEY STYLE)
PS SERIES PNEUMATIC SLIPS PS Series Pneumatic Slips are pneumatic tools which are suitable for all kind of rotary table for hoisting drill pipes and handling casings. They are mechanized operating with Strong hoisting force and large working range. They are easy to operate and dependable enough. At the same time they can not only reduce the workload but also improve the work efficiency. Technical Parameter Model rotary Table Size(in) pipe size(in) Ratedload Work P...
-
API 7K Type SLX Pipe Elevator for Drill String ...
Model SLX side door elevators with square shoulder are suitable for handling tubing casing, drill collar in oil and natural gas drilling, well construction. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) SLX-65 3 1/2-14 1/4 65 SLX-100 2 3/8-5 3/4 100 SLX-150 5 1/2-13 5/8 150 SLX-250 5 1/2-30 250 ...